KSP HOSPITAL BED - THREE BODIES AND 2 CRANKS - HORUS SERIES

KSP HOSPITAL BED WITH TWO CRANK - HORUS SERIES

Fixed height 3-joint / 4-section bed.

Bed base with steel slats.

Adjustable head section and leg section with 2 folding and retracting cranks. Fixed pelvis section.

Foot section automatically adjustable with the leg section.

Supporting and removable shoulders on tips.

Made in Italy.

Technical features:
Mesh bed 2 HORUS KSP cranks

Construction features

Net frame

The HORUS KSP 2-crank mesh bed has an external perimeter supporting structure built in steel profiles with a rectangular section.
Mobile sections frame made of steel tube with rectangular section, rounded edges.
Rigid net sheet made of 100 × 50 mm rectangular mesh steel rod. welded to the mobile frame.
Equipped with two supports for patient lift pole and IV pole.
Sections of the lying surface

4-section bed base.
Adjustable head section and leg section by means of two independent screw pushers with folding and retracting cranks.
Foot section automatically adjustable with the leg section.
Fixed pelvis section.
Shoulders

Removable load-bearing headboard / footboard made of painted steel tube with round section Ø 30 × 1.5 mm. with plastic tips at the base
(Standard version).
Removable panels in melamine thick. 12 mm.
Standard color White.
Finish

Painted in the oven at 200 ° C with epoxy powders.
White color.