TECNO-GAZ AIR BIOLOGICAL TREATMENT EQUIPMENT-STERILAIR PRO

Airborne contamination has always been a serious problem in our society; in fact there are many airborne diseases.

Meningitis, diphtheria, tuberculosis, measles, rubella, mumps, and even simple flu, colds and the new forms of flu that have appeared in recent years.

 In some environments the problem of airborne transmission is particularly critical, especially those places where there is a high density or turnover of people (public places, meeting places, schools, kindergartens etc.), or healthcare or surgical environments.

Some healthcare environments are even more critical, for example dental environments, where the sprays and ultrasounds used spread microparticles which are then transported into the environment. 

All these infections are increasingly widespread, so much so that in some cases they are even defined as pandemics, generating high costs and major social problems.

Based on the recommendations of the CDC (Centers of Disease Control and Prevention), devices to treat the environmental bioburden can immediately be applied to reduce the risk of transmission of airborne diseases, and these systems can be used in any enclosed space.

TECNO GAZ is the manufacturer of STERILAIR Pro, a device that we first studied, designed and produced for dental use 20 years ago with the aim of creating an extremely high-performance device using UV-C mercury vapour discharge lamps tested for the abatement of volatile biological particles with a life of 9000 hours, simple and intuitive to use, fully programmable and maintenance-free.

STERILAIR Pro is equipped with 4 lamps (which are the active treatment agent), enclosed in a special reflective chamber and this ensures maximum biological results.

We also used a self-cleaning filter (up to 2000 hours) to block dust and microparticles, avoiding the use of other filters that reduce the air flow rate and require periodic maintenance.

Thanks to the choices made we can guarantee optimum results, eliminating periodic costs and ensuring the highest possible safety levels.

Thousands of dental practices and doctors in Italy and around the world use this extraordinary system.

Using STERILAIR Pro means:

• Reducing the risk of operator contamination, as also required by the  Consolidated Safety Act and recently also recommended by the WHO (World Health Organisation)
• Reducing or eliminating the potential contamination of operators and patients
• Having a bacteriologically safe environment

Boasting an innovative design, STERILAIR PRO overcomes the problems of direct and indirect exposure to short wavelength ultraviolet rays (UVC 254 nm) and can be used continuously even in the presence of people, without any risk to the latter.

The most effective means for destroying microorganisms in the air.

The device works on the basis of a closed loop forced ventilation system.

The air sucked in by STERILAIR Pro first passes through a dust filter located in the intake, which is designed to block the coarsest pollutants, giving the air an initial purification. 

The air then enters the irradiation chamber in direct contact with the mercury vapour tubes which, thanks to the emission of UV-C radiation, carry out maximum germicidal action.

The air is expelled from the outlet nozzle thus carrying out microbiological abatement.
 

THE BEST ADVANTAGE OF STERILAIR PRO is that it can carry out the continuous and constant disinfection of the air in any environment, during any working phase and in the presence of operators.

You can programme STERILAIR Pro to switch on a couple of hours before your arrival at the practice and then keep the equipment on throughout your working day.